Gold Member Since 2016
Audited Supplier
Zhuhai Allianz Electronics Co., Ltd.

Test Equipment, Glow Wire Tester, Flammability manufacturer / supplier in China, offering Glow Wire Tester Flammability Testing IEC60335-1, Ground Recessed Luminaires Tester/IEC60598-2-13, Resistance to Static Load and Resistance to Torque and Shear Loads Tester and so on.

(/ )

Supplier Homepage Product Flammability & Other Plastics Testing Glow Wire Tester Flammability Testing IEC60335-1

Glow Wire Tester Flammability Testing IEC60335-1

Purchase Qty.:
1-2 3+
FOB Unit Price: US $6,000 US $5,500
Purchase Qty. (Pieces) FOB Unit Price
1-2 US $6,000
3+ US $5,500
Get Latest Price
Production Capacity: 50
Transport Package: in Plywood Carton
Payment Terms: T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: GW-01A
  • Delivery: Within 10-15days
  • Certification: Cnas Calibration Provided
  • Power: 220V 50Hz or 110V 60Hz
  • Specification: >0.5m³
  • HS Code: 9031809010
  • Standard: IEC60695-2-10/11/12/13
  • OEM/ODM: Acceptable
  • Warranty: One Year
  • Trademark: Allianz
  • Origin: Zhongshan, China
Product Description
Glow Wire Tester (Model:GW-01A)

The Glow-Wire tester is used to establish if overheated electrical and electronic components resulting from malfunctions such as overload, short circuit, poor connection, or others may ignite and spread the flame to the rest of the product. The Glow-Wire Tester simulates an overloaded resistor or other ignition source and applies heat to the specimen for a short period of time. Through observation and measurement, the fire hazard of the specimen can be determined.
The Allianz Glow-Wire Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The ignition source is simulated by an electrically heated wire loop. The temperature of the loop is maintained through a thermocouple and controller. The test specimen is then pressed against the tip of the wire loop at a constant 1N force. A scale provides easy reading of any flame heights that may occur. The sample carriage can be set prior to the test to limit the glow wire penetration to a maximum of 7mm. Under the test stand is a pine board covered with standard tissue paper. Any heated or burning debris from the specimen will land on the tissue. This provides additional analysis of whether or not debris from the test specimen may cause spreading of flames.

Used to determine the flammability tendency of components and materials that come in contact with other overheated components, this test is critical to the safety of consumer products. The instrument is designed to conform to the most commonly used standards in the market.

---Self contained cabinet with large viewing window and dark colored interior
---Easy access to testing area during setup
--- Adjustable current device, the heating current indicated by the ammeter
---Built in exhaust fan
---Control panel has all controls in easy reach including lighting and exhaust
---Automated test advances the glow-wire at a prescribed speed and quickly retreats when the test time ends.
---Internal cabinet light can be turned on during test setup and shut off to give better viewing during the test
Conforms To
IEC 60695-2, under the general heading Fire hazard testing - Part 2: Glowing/hot-wire based test methods, consists of the following parts:
Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability test method for materials
Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test method for materials
IEC60335-1, IEC60598-1, IEC60745-1, IEC60884-1. GB/T5169.10/11/12/13, GB7000.1-2002
Power Supply: 220V 50Hz or 115V 60Hz
Glow-wire Temperature Range: Room temperature~999°C (adjustable)
Glow Wire : Cr/Ni(>77% Ni/20±1 % Cr, Ø4mm±0.07mm) 500W
Fluctuation of Temperature: ±3°C
Temperature Testing Component : Type K thermocouple(¢1.0mm, 0~1050°C)
Heating Transformer: 500VA
Operation Manner: Touch screen controller
Pressure of test sample: 0.95N±0.1N
Depth of Penetration: 0~9mm
Time of Test: 0~99seconds adjustment
Cabinet Specifications : >0.5m³, black interior
Vent Pipe Diameter : 100mm
Outer Dimensions : W*D*H=1000mm*650mm*1250mm
Weight:  80KG
Ordering Information
GW-01A Glow-Wire Tester - specify 220V 50Hz or 115V 60Hz
1 White Pine Test Board
5 Sheets of Tissue Paper
5 Silver Foil (for calibration)

White Pine Test Board (10mm thick, 180mm*120mm)
Tissue Paper (ISO4046, PK 50Pcs,A3 paper size)
Silver Foil (0.06mm thick, 2mm*2mm, PK 5Pcs)
Glow Wire Loop (Cr/Ni(>77% Ni/20±1 % Cr, Ø4mm±0.07mm) 500W
Thermocouple Type K  (
Glow Wire Tester Flammability Testing IEC60335-1
Send your message to this supplier
Miss Tina
To: Miss Tina

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now